Table of Contents
Advertisement
Display call parameters
ARGUS PRI
Can listen-in on voice data (direction:
Network -----> User).
<Quiet>
<Talk>
Call
The ARGUS displays the call parameters
of the last SETUP received.
As soon as a change occurs, the ARGUS
will send a time-stamped report of the
following alarms/states to the PC, which
will evaluate them:
- Signal
- FAS
- CRC4det
- A bit
- AIS
The ARGUS will check the following
values and counters every second and, in
the event of a change, will pass them on
the PC:
- Sa5-Bit (Rx)
- Sa6-Bit (Rx)
- E-Bit
- Ecnt
- CRC Err.
- Cod.Err.
- Fram.Err.
4 Operation on a PRI Access
To stop listening
Parallel call display while
monitoring
The ARGUS searches all of the D-
channel signals sent for a SETUP.
If a SETUP is detected, the
softkey will be displayed.
<Talk>
57
Advertisement
Table of Contents
