Table of Contents
Advertisement
4 Operation on a PRI Access
User data
ASCII data
ASCII data 1/3
Enter ASCII data
Save
ASCII
Hex data
Hex data 1/3
Enter hexadecimal data
Save
D bit
38
Content of the user data: Format setting of the user data:
<Edit>
<12>ab>
<ab>AB>
<AB>12>
<Delete>
<Edit>
<Delete>
Local: DCE acknowledges data packets, i.e. flow control on local
DTE-DCE path
End-to-end: DTE-DTE flow control
Default setting: Local
- Entry of the ASCII data
Use the cursor keys to select one of the
three available memory locations for the
ASCII data (in this example, the first
location 1/3)
Use the numeric keypad to enter the
ASCII data. When the right softkey is
pressed it assumes a different meaning
and thus influences the entries made
from the keypad:
Entry of the digits 0 to 9 plus * and #
Entry of the lowercase characters and
@, /, -, and .
(e.g. to enter a "c" press the "2" on the
keypad three times)
Entry of the uppercase characters and @,
/, - and .
Move the cursor
Delete the character before the cursor
Do not save ASCII data.
Entry of the hexadecimal data:
Select one of the three available memory
locations for the hexadecimal data (in this
example, the first location 1/3)
Use the keypad to enter the hex value. To
enter the values A...F, use the softkey
(e.g. to enter a C, press the
<A...F>
softkey
three times). To confirm
<A..F >
the entry, press
<OK>
middle changes from
Delete the character before the cursor
Do not save the hexadecimal values.
(the softkey in the
to
).
<Delete>
<OK>
ARGUS PRI
Advertisement
Table of Contents
