Table of Contents
Advertisement
4 Operation on a PRI Access
4.12 Monitor
The ARGUS accepts all of the D-channel signals from the S-Bus access and sends these
D-channel signals over the USB interface to a PC which must be running ARGUS WINplus
or WINanalyse. The bus and Layer 1 are not influenced by the monitoring.
Status display
B-channel select
Continuation on
next page
56
<Start>
Monitoring is not yet active!
Start monitoring
The ARGUS displays the recording time
(duration) in h:min:sec and the number of
recorded signals.
Stop monitoring.
Listening-in on voice data
Enter the B-channel from the keypad (first
press
) or use the cursor keys to
<Delete>
set the B-channel. The ARGUS will switch
the handset to this B-channel.
ARGUS PRI
Advertisement
Table of Contents
