Intec ARGUS Manual page 28

4 Operation on a PRI Access
When a bit error is detected the ARGUS will sound a brief alarm. When synchronisation
has been lost, the ARGUS will sound a constant alarm (see the ARGUS main Manual), if
one has been configured earlier.
After the BERT is over, the ARGUS will display the cause and the location which initiated
the disconnect. If the test ran normally, the ARGUS will display "Active clearing" on this line.
28

The ARGUS will generate an artificial
<Error>
bit error, which can be used to test
the reliability of the measurement (in
particular for end-to-end tests).
Opens the Test Manager, see
<TM>
page 66
Restarts the BERT. The test time and
0-Key
or
number of bit errors will be reset.
<Reset>
Stop the BERT

ARGUS PRI