Table of Contents
Advertisement
4 Operation on a PRI Access
4.7.3 Manual X.31 Test
D-Channel
The ARGUS first requests a TEI, an LCN and an X.31 number (The ARGUS uses the
values stored in the X.31 profile.). If an "
automatically determine a TEI. Using the first TEI with which X.31 is possible, the ARGUS
will setup a connection.
Single Tests
X.31 Test
X.31 profile 1
Manual
D-Channel
TEI is displayed
LCN is displayed
X.31 number displayed
Continuation on
next page
42
" is entered for the TEI, the ARGUS will
**
The ARGUS – Main menu
Select a profile.
Change to the profile parameters
<Edit>
The parameters can be edited.
The ARGUS displays the TEI stored in the
X.31 profile. It can be edited from the
keypad. If you enter „ **" , the ARGUS will
automatically select a TEI.
Delete the TEI
<Delete>
The ARGUS displays the stored LCN. It is
possible to edit the LCN from the keypad.
The ARGUS displays the X.31 number
saved in the speed-dialing memory. It can
be edited from the keypad.
Setup a X.31 connection.
ARGUS PRI
Advertisement
Table of Contents
