Overlap sending (outgoing call)
In overlap sending, the digits entered for the call number are sent individually.
Single Tests
Connection display
Overlap sending
Select service
B-channel select
Continuation on
next page
ARGUS PRI
4 Operation on a PRI Access
The ARGUS - Main menu
The ARGUS will open the
Connection display
Where Overlap sending (such as
links) as well as
- En-block sending (see below)
- Redialing (see below)
- Keypad dialing
are available.
Select the service to be used for the
connection.
Enter the B-channel on the keypad. The
ARGUS selects the B-channel used last.
To enter a new B-channel, first press
. If you enter an *, the ARGUS
<Delete>
will choose any B-channel that is free.
The ARGUS will show whether the B-
channel is available.
Setup the connection
Enter the number on the keypad.
Display:
- B-channel and service
- The number that is stored in the
speed-dialing memory under "Own
number", see the ARGUS main Manual
(from:)
- The number dialed (to:)
- Other information depending on the
access, e.g. TON and NP
Starts the Test Manager
<TM>
(page 66)
Setting the volume
<Volume>
or
Cancel setup
45