Advertisement
Editing the
reference level
Measurement
mode
Watt
The display switches to the selected mode.
The following procedure describes how to edit the reference
level.
To edit the reference level
1 Verify you are in relative measurement mode.
2 Press the Reference soft key.
3 Select Edit Ref.
A pop up appears to enter the reference value.
If several wavelengths are displayed, the first reference
value is highlighted.
4 Enter the reference value, including two decimal places,
and then press OK.
5 If there are more wavelengths, pressing OK will move to
the next wavelength. Repeat
The new reference values appear on the screen, and the
measured power level is calculated and displayed.
HST-3000 OLP-3057 Optical Power Meter User's Guide
Description
Absolute measurement mode, with results
displayed in watts.
step
Chapter 3 Optical Testing
Broadband testing
4.
25
Advertisement
