Advertisement
– if the wavelength encoding cannot be detected due to
interference
– if you are measuring the absolute level of a system that
does not have wavelength encoding like JDSU's power
sources
To enable Auto lambda recognition
1 Press the Configure
The wavelength table menu appears.
2 Press the AutoL soft key to turn ON (enable) or turn OFF
(disable) Auto lambda recognition.
The checkmark next to Auto lambda recognition will appear if
Auto lambda is enabled.
HST-3000 OLP-3057 Optical Power Meter User's Guide
Chapter 3 Optical Testing
Broadband testing
navigation key.
23
Advertisement
