Advertisement
Chapter 3 Optical Testing
Broadband testing
Broadband testing
Selecting
Broadband
mode
Selecting a
wavelength
20
This section provides procedures for using the features
included in the Broadband mode. Topics include the following:
–
"Selecting Broadband mode" on page 20
–
"Selecting a wavelength" on page 20
–
"Selecting a measurement mode" on page 24
–
"Measuring optical levels" on page 26
The Broadband power meter expands the field of applications
of the OLP-3057. In addition to testing dedicated FTTx instal-
lations, the module can test for any power measurement
within the wavelength range of 800 to 1650 nm.
To test in Broadband mode, you must select the Broadband
application from the main menu.
The Broadband Summary menu appears.
The wavelength to be measured can be selected from the Set
Lambda list (under the Display soft key). In this list, up to eight
wavelengths can be listed.
HST-3000 OLP-3057 Optical Power Meter User's Guide
Advertisement
