Advertisement
To load a stored threshold mask
1 Press the Configure
2 Press the File soft key.
3 Select Load File.
The folder for the threshold masks opens.
4 Select a threshold mask and then press OK.
The settings of the selected threshold mask are applied and
the name of the threshold mask is displayed in the threshold
mask pane.
Editing the
If you want to modify an existing threshold mask, do the
thresholds
following to edit the thresholds.
To edit the thresholds
1 Press the Configure
2 Press the Edit soft key.
3 Select the wavelength to be edited.
The Over/Pass threshold of the selected wavelength is
highlighted.
4 Enter a new threshold or press UP/DOWN arrow keys to
edit threshold.
5 Press the OK key to edit the next threshold.
6 Proceed to next wavelength by pressing the OK key
again.
7 To store these settings, press the File soft key then select
Save file.
8 Enter the file name and then press OK.
HST-3000 OLP-3057 Optical Power Meter User's Guide
Chapter 3 Optical Testing
navigation key.
navigation key.
FTTx testing
19
Advertisement
