Advertisement
To select a wavelength
1 Press the Display soft key.
2 Select Set Lambda, and then select a wavelength from
The wavelength is selected and displayed in the measure-
ment results window.
Editing the
You can edit the Set Lambda list to show only the wave-
wavelength list
lengths you need. For example, if you frequently use 1310
and 1550 nm, you can specify that only those two wave-
lengths are displayed.
To edit the wavelength list
1 Press the Configure
2 Use the up and down keys to highlight the specified wave-
3 Press the Show soft key to toggle the check mark.
4 Repeat steps 2 and 3 to select up to 8 wavelengths.
HST-3000 OLP-3057 Optical Power Meter User's Guide
the list.
The wavelength table menu appears.
length.
The check mark indicates whether the wavelength is
shown (checkmark) or hidden (blank) in the Set Lambda
list.
Chapter 3 Optical Testing
Broadband testing
navigation key.
21
Advertisement
