Setting Password For Date And Time - Casio DT-X100 Series Software Manual

3.5.1 Setting Password for Date and Time

Select Start -> Programs -> Windows Explorer, then open the Windows folder.
(1) Start "passtool" from the window below.
(2) From the dialog below, set the password to input when the terminal starts up.
Item
Password
Confirm password
Note: To cancel the password, leave both Password and Confirm password blank and press the
OK button.
Only numerals in the range 0~9 are valid (up to 10 digits).
Re-input the same value as above for the password.
105
Explanation