Imager (2D) Settings; Imager Settings - Casio DT-X100 Series Software Manual

3.7 Imager (2D) Settings

This function only applies to models equipped with an imager (2D). Refer to Chapter 2, "2.10
Imager (1D/2D codes, postal codes)" for details of this function.

3.7.1 Imager Settings

Select Start -> Settings -> Control Panel - Imager Setting.
Use the dialog below to change CMOS imager device settings.
［1D］Tab
Tab
1D
2D
Item
All
Specify the 1D code to read.
Multiple symbologies can be specified.
All
Specify the 2D code to read.
Multiple symbologies can be specified.
［2D］Tab
Explanation
112