Casio DT-X100 Series Software Manual page 116

［System］Tab
Tab Item
System Scanner
APO
Power up
device with
trigger key
IMGRead Timeout
Add Suffix
Indicator
Output
［IMGRead］Tab
This filed is to set up a time period in the range of 0 to 1800 (in
second) for the APO function to activate.
Setting "0" will disable the function.
This checkbox is to set "Turning ON the terminal with the Trigger
key" effect.With a check mark in the checkbox, the power on the
terminal can be turned on when one of the Trigger keys is pressed
down.
This field is to set up a time period for the Timeout to activate in
scanning operation.Scanning terminates either when the Trigger
key is released or when the time period in milliseconds set in this
field elapses.
This field is to specify a suffix that is appended at the end of each
decoded data.
These two checkboxes are to set scanning completion notification
method with either LED or sound or both.
Notification method with a check mark in the checkbox will activate
when scanning a symbol is complete.
These two radio buttons are to specify an output method for
decoded bar code data selecting either one of the buttons.
116
Explanation