Casio DT-X100 Series Software Manual page 142

- Backup procedure
Select Start -> Programs -> Utilities -> Backup Tool.
The backup procedure is as follows:
1. Start backup
i The save location is the backup destination, so choose it from the following options:
FlashDisk
ii Press the "Backup now" button.
iii The Password Input screen is displayed, so specify the password as required (may be omitted).
Press the Yes button to start backing up data to the selected save location.
Password
Confirm Password
CAUTION
 For security purpose, a password can be input at the starting up the backup process.
 Data cannot be restored until the correct password is input at the restore stage.
 If the backup password is set, it disables automatic restoration with the automatic Backup Tool.
2. Specify password
Any password may be input (or may be omitted).
If you input a chosen password, input the same password again.
142