Casio DT-X100 Series Software Manual page 153

(5) Close Copy Devices
The message dialog is displayed after reception was completed in Normal Copy mode.
The terminal resets if you select "Yes".
Transmission screen
(1) Send Mode screen
On the Send screen, first select which of the following modes to receive in.
 Normal Copy: This send mode is suitable if the duplicate is operating in Normal Copy mode.
 Ripple Copy: This send mode is suitable if the duplicate is operating in Ripple Copy mode.
Send Mode Selection screen
No. Item
1 "1 Normal Copy >>"
button
2
"2 Ripple Copy >>"
button
3 "<< Back" button
4 "Exit" button
Select the same mode on the duplicate (the terminal that operates in Receiver mode) as well.
Communication proceeds even if different modes are selected on the parent unit and the duplicate,
but if both terminals are communicating in the same mode, it takes less time for communication to
start.
Operation
Data is sent in Normal Copy mode, and the
display transitions to the Group Name Settings
screen*.
Data is sent in Ripple Copy mode, and the
display transitions to the Group Name Settings
screen * .
Return to the previous screen.
Closes this tool
153
Key operation
Press either "1"
or "F2"
Press either "2"
or "F3"
Press the F1
key
-