Casio DT-X100 Series Software Manual page 77

(5) Terminology
Roaming
This function automatically switches access points in an environment where two or more access
points with identical SSID code exist.
Power saving
This saves power by automatically turning off power to the wireless circuit in the module in the
terminal when communication does not take place.
Ad hoc mode
This operation mode provides a direct communication between wireless equipment, without the
use of an access point.
Note, however, that the AdHoc mode is not recommended, because connection problems may
occur.
WEP
This is an encryption function that uses RC4 for safe communication.
40bit (64bit) and 104bit (128bit) are supported.
TKIP
Is used to encrypt the wireless LAN, it is one of the encryption scheme which has been adopted by
the WPA.
TKIP is supported to guard against WEP vulnerabilities.
AES
It is a new generation standard encryption scheme of the United States government.
AES can be used the encryption algorithm.
802.1x Security
This can strengthen authentication and establish a safe and reliable communication via wireless
LAN.
In general, this interlinks with TKIP.
It supports PEAP-EAP-MS-CHAP-V2, and EAP-TLS.
77