Casio DT-X100 Series Software Manual page 28

(4) Bluetooth connection status LED
This is used for notification of Bluetooth connection status.
Lighting specification
Item
Connection established via
wireless LAN
Time continuously ON
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
(5) User-defined LED
This is used for other notifications defined by the user.
Lighting specification
Item
User definition
Time continuously ON
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
(6) Virtual Off
When the system has entered virtual off state, LED lighting requests are ignored. However, a LED
that is already on will not be turned off. LED lighting requests are accepted again on restoration
from the virtual off state.
(7) Simultaneous notifications
If Bluetooth and W-LAN wireless connections are established at the same time, the LED in the
colors corresponding to each status are turned on and off alternately.
Example) If Bluetooth and W-LAN wireless connections have been established
Blue LED on -> blue LED off -> orange LED on -> orange LED off ->
(Repeat)
On in blue for 1 second, off for 2 seconds
Color: Refer to "2.5 List of Functions".
Time: Set on time and off time
30 minutes (off when Voltage detector is detected.)
28
Specification
Specification