Buzzer - Casio DT-X100 Series Software Manual

Buzzer

2.3.2
The buzzer outputs sounds from the speaker for scan complete, key click, tap sound, alarm sound,
warning sound, and other optional sounds. It does not output through headphones. Use the audio
driver function to output through headphones.
Buzzer sounds have the following 4 types of attributes. The default values are as stated in the table
below.
Alarm sound
Warning sound
Scan complete
sound
User-designated
sound
i Buzzer sound volume can be set in three levels, low, medium, and high. However, the key
click and screen tap sounds can only be set to two levels, low and high. Mute can be turned
on and off.
Refer to "3.4 Volume settings" about tool operation.
ii This can also be set from a user application by API.
For details, refer to the System Library Manual.
Note) When the system has entered virtual off state, buzzer output requests are ignored. Even the
sound of ringing is muted.
Frequency Time
(Hz) (millisecond)
3500 150
3000 100
3300 75
- -
Individual
mute
ON/OFF
ON/OFF
ON/OFF
ON/OFF
25
Attribute
B_ALARM
B_WARNING
B_SCANEND
B_USERDEF