Vibrator; Vibrator Control - Casio DT-X100 Series Software Manual

2.5 Vibrator

Vibrator (vibration) operates for scan complete, alarm occurrence, warning occurrence, wireless
incoming call, and user-defined purpose.
Each vibration operation can be turned on and off individually. The functions of each are as follows:
2.5.1

Vibrator control

There is one level of vibration intensity, and the vibration interval can be set in two different patterns,
the default setting and a user-defined setting.
Pattern
Default
User
Type
Alarm
Warning
Barcode scan complete
Wireless incoming call
User definition
- The vibrator can be set from a tool or from a private library.
- The vibrator has lower priority.
- The vibrations in the table above can be suppressed from the system library.
For details, refer to the System Library Manual.
- Virtual Off
Vibrator vibration requests are ignored. Vibration that is already in progress is stopped.
Vibrator vibration requests are accepted again on restoration from the virtual off state.
Specification
Vibration on for 1 second, off for 1
second x [times]
Specified vibration period, specified
stop period x [times]
Specification range: Vibration: 1/16s ~
16s
Stop: 1/16s ~ 1s
Vibration pattern
Default
Default
Default
Default
User
Maximum no. of times: 20
Maximum no. of times: 20
Individual setting
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
29
Remarks
Default
OFF
OFF
OFF
OFF
OFF