Breville Oracle Instruction Book page 19

SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
NOTE
The 1 CUP & 2 CUP buttons use duration to
control espresso volume. Access the Advanced
Features if you wish to use volumetric controls
instead of duration to determine espresso
volume. Refer to 'Flow Measurement Method
(VoL)', page 24).
SHOT TEMPERATURE
While 'SHOT TEMP' is displayed on the
LCD, press the SELECT dial. The current
temperature will flash. Turn the SELECT dial
to required temperature then press SELECT
dial to set. Machine will beep once to confirm
new temperature.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
CLEANING CYCLE
The cleaning cycle cleans the shower screen
and back-flushes the group head. Select this
feature when the LCD displays 'CLEAN ME!'
Refer to 'Cleaning Cycle', page 30.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SET CLOCK
Setting the clock is optional. While 'SET
CLOCK' is displayed on the LCD, press the
SELECT dial. The current time will flash or
default to 12.00AM if the time has not been
set. Turn the SELECT dial to the left or right
to adjust time. Turning the SELECT dial faster
or slower will change the rate of adjustment.
When required time has been reached, press
the SELECT dial to set. Machine will beep once
to confirm the clock has been set.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
SELECT SELECT SELECT
19