Breville Oracle Instruction Book page 15

ESPRESSO EXTRACTION
Align portafilter handle with the INSERT
position on the group head. Lift to insert
portafilter into the group head and rotate
towards the LOCK TIGHT position until
resistance is felt.
EXTRACTION GUIDE
The 1 CUP button
use duration to control espresso volume.
The duration times are preset, but can be
reprogrammed (refer to 'Programming Shot
Volume/Duration', page 18). Alternatively,
access the Advanced Features if you wish to
use volumetric controls instead of duration
to determine espresso volume (refer to 'Flow
Measurement Method (VoL)', page 24).
1 CUP BUTTON
Press 1 CUP button once to extract a single
shot of espresso at the preset duration
(25 seconds). The extraction will start using the
low pressure pre-infusion.
The machine will stop after 1 CUP duration
has been extracted and will return to
STANDBY mode.
2 CUP BUTTON
Press 2 CUP button once to extract a double
shot of espresso at the preset duration (30
seconds). The extraction will start using the
low pressure pre-infusion.
and 2 CUP button
The machine will stop after 2 CUP duration
has been extracted and will return to
STANDBY mode.
MANUAL OVERRIDE
Press and hold either 1 CUP or 2 CUP button
to commence pre-infusion. When the required
pre-infusion duration is met, release button to
begin full pump pressure.
Press button again to stop pour when required
duration has been achieved.
TEXTURING MILK
The SELECT dial is used to select milk
temperature and texture. Press the dial to
toggle between milk temperature & texture.
The flashing value (either temperature
or texture triangle) can be changed by
rotating the dial.
ADJUSTING MILK TEMPERATURE
Press the SELECT dial until the milk
temperature flashes. Rotate dial to increase
or decrease milk temperature. The selected
temperature will be displayed on the steam
LCD. The ideal temperature for milk is between
131˚F –150˚F (55˚C–65˚C) as indicated by the
smiley face icon.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
ADJUSTING MILK TEXTURE
Press the SELECT dial until the milk texture
triangle flashes. Rotate dial towards 'CAPP'
for more texture or 'LATTE' for less texture.
The selected texture will be displayed on
the steam LCD.
STEAM
15