Firmware Std3.0.3.0; Firmware Std3.0.3.1; Tcp3 Configuration Tool; Tcp3 Config V3.0.0 - Elatec TCP3 3.0.3.1 Technical Manual

10. History of Changes

10.1.4. Firmware STD3.0.3.0

• All configuration settings and the status log are saved over firmware upgrade
• WebUI password, CA certificates, internal certificates, private keys are saved over firmware upgrade
• Status page now displays up time from last power on and total lifetime power on hours
• Printed configuration page now displays up time from last power on and total lifetime power on hours
• Status page now shows the Host and Printer MAC addresses
• New API available to interface with external I/O via web service response
• Python upgraded to version 3
• Removed Perl
• jQuery upgraded to version 3.6.0
• Added ability to pull print jobs from cloud server via signed URLs
• Resolved an issue where 64 digit card numbers were occasionally truncated
• Tested and added Targus AKP10-A numeric Pin Pad to the USB white list
• Tested and added Perixx Peripad 202 numeric Pin Pad to the USB white list
• Tested and added HCT numeric Pin Pad to the USB white list
• Tested and added a second version of Magtek mag stripe reader to the USB white list
• Resolve connection issues when hot swapping CDC readers
• Added printer MAC and serial number to web service message
• Added support for DER formatted certificates
• Added a handful of security related HTTP response headers
• URLs are now obfuscated in status log
• Client based UDP socket communication is now enabled for host based addresses
• Added hidden External I/O page
• Added link to External I/O status at the bottom of the System page

10.1.5. Firmware STD3.0.3.1

• Tested and added a second Targus AKP10-A numeric Pin Pad to the USB white list
10.2. TCP3 Configuration Tool
10.2.1. TCP3 Config V3.0.0
• Initial release
Page 57 of 61