History Of Changes; Tcp3 Converter Firmware; Firmware Std3.0.0.0; Firmware Std3.0.1.0 - Elatec TCP3 3.0.3.1 Technical Manual

10. History of Changes

10. History of Changes

10.1. TCP3 Converter Firmware

10.1.1. Firmware STD3.0.0.0

• Initial release

10.1.2. Firmware STD3.0.1.0

• Factory default password changed from admin to last 8 digits of TCP3 Host MAC address
• Network setup supports printers on static IP address
• Enable client connection via http using web service calls
• Updated Syslog window behavior
• Enable status log to use local time instead of UTP
• Enable remote configuration of connected TWN4 card reader
• Status page now shows TCP3 hardware version
• Status page now shows description of connected USB device
• Status page shows configuration details of connected TWN4 reader
• Status page shows memory usage based on 8 gig memory device
• Qualified additional USB devices to the white-list

10.1.3. Firmware STD3.0.2.0

• Added support for CDC
• Added OAuth for USB client mode with web services and AWS
• Tested and added Lenovo KU-9880 numeric Pin Pad to the USB white list
• Added new Security tab for management of certificates
• Added full support for CSR based certificates
• Added support for root certificates for client applications
• Added ability to upload customer certificate for communication as server
• Added the ability to install a certificate authority and chain of trust
Page 56 of 61