Elatec TCP3 3.0.3.1 Technical Manual page 48
Hide thumbs
Also See for TCP3 3.0.3.1:
- User manual (13 pages) ,
- User manual (14 pages) ,
- Quick start manual (5 pages)
Table of Contents
Advertisement
6. Configuration via Web Page
helps to identify the reader or PIN pad which is connected and also whether that device is supported by
TCP3. If a second USB device is connected, that status will be displayed associated with the second USB
port.
Status Log This will display the power on sequence as well as the status of the connections to the host,
printer and USB. The log can easily be copied and sent to Elatec Support to aid in troubleshooting any
issues encountered. The log displays the date and time of each event. It receives this time using the
Network Time Protocol (NTP). The converter expects to find an NTP server at the address of the DHCP
server. If the converter is configured for Static IP or if there is no NTP server resident with DHCP, the
converter will report time since it was powered up, starting with midnight January 1, 1970.
Page 48 of 61
- Quick Links:
- Reset to Factory Default
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TCP3 3.0.3.1 and is the answer not in the manual?