Steps
1. Align and place the power-button board on the chassis.
2. Install the (M2x3) screw to secure the power-button board to the chassis.
3. Connect the power-button board cable to the connector on the system board and close its latch.
Next steps
1. Install the
heatsink
assembly.
2. Install the
input output
3. Install the
display
assembly.
4. Install the
base
cover.
5. Exit the
service
mode.
6. Install the microSD-card.
7. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
4. Remove the
base
cover.
5. Remove the speaker.
6. Remove the
M.2 solid-state
7. Remove the
system
fan.
8. Remove the
display
assembly.
9. Remove the
input output
50
Removing and installing components
board.
after working inside your
before working inside your
drive.
board.
computer.
computer.