Installing the battery cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Steps
Connect the battery cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Exit the
service
mode.
4. Install the microSD-card.
5. Follow the procedure in
Battery
Removing the 3-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
After working on your
computer.
before working inside your
computer.
Removing and installing components
29