Installing the MicroSD-card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image provides a visual representation of the MicroSD-card installation procedure.
Steps
Insert the microSD-card into its slot until it clicks into place.
Next steps
1. Follow the procedure in
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
About this task
The following images indicate the location of the base cover, and provide a visual representation of the removal procedure.
14
Removing and installing components
after working inside your
before working inside your
computer.
computer.