Removing The 4-Cell Battery - Dell Latitude 3320 Service Manual

Steps
1. Align and place the battery in the slot on the chassis.
2. Install the three (M2x3) screws to secure the battery in place.
3. Route the battery cable through the routing channel in the battery.
4. Connect the battery cable to the connector on the battery and adhere the adhesive tape.
5. Adhere the adhesive tapes to secure the battery in place.
Next steps
1. Install the base cover.
2. Exit the service mode.
3. Install the microSD-card.
4. Follow the procedure in

Removing the 4-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the service mode.
4. Remove the base cover.
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
After working on your computer.
before working inside your computer.
Removing and installing components 31