Table of Contents
Advertisement
Steps
1. Align and place the battery in the slot on the chassis.
2. Install the five (M2x3) screws to secure the battery in place.
3. Route the battery cable through the routing channel in the battery.
4. Connect the battery cable to the connector on the battery and adhere the adhesive tape.
5. Adhere the adhesive tapes to secure the battery in place.
Next steps
1. Install the
base
cover.
2. Exit the
service
mode.
3. Install the microSD-card.
4. Follow the procedure in
System fan
Removing the left system fan
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
base
cover.
4. Remove the battery.
About this task
The following image indicates the location of the left system fan and provides a visual representation of the removal procedure.
After working on your
computer.
before working inside your
computer.
Removing and installing components
33
Advertisement
Table of Contents
