Steps
1. Align and place the heatsink assembly into the slot on the system board.
2. Tighten the four captive screws to secure the heatsink assembly to the system board.
3. Close the solid-state drive mylar sheet to cover the solid-state drive.
Next steps
1. Install the
base
cover.
2. Exit the
service
mode.
3. Install the microSD-card.
4. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
46
Removing and installing components
after working inside your
before working inside your
computer.
computer.