Table of Contents
Advertisement
Steps
1. Align and place the system fan onto the palmrest assembly.
2. Install the two (M2x3) screws that secure the system fan in place.
3. Connect the system fan cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the microSD-card.
4. Follow the procedure in
Removing the right system fan
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
base
cover.
4. Remove the battery.
About this task
The following image indicates the location of the right system fan and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
35
Advertisement
Table of Contents
