Table of Contents
Advertisement
Table 13. System setup options—Update, Recovery menu (continued)
Update, Recovery
BIOSConnect
Dell Auto operating system Recovery
Threshold
Table 14. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Auto on Time
Table 15. System setup options—Keyboard menu
Keyboard
Numlock Enable
Fn Lock Options
Lock Mode
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
Warning and Errors
USB-C Warnings
Enable Dock Warning Messages
Fastboot
Extend BIOS POST Time
Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.
By default, the threshold value is set to 2.
Displays the Service Tag of the system.
Create a system Asset Tag.
Enable or disable the wake on AC option.
By default, the option is disabled.
Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Allows you to enable or disable the Numlock function when the system boots.
By default, the option Fn Lock Options is enabled.
By default, the Fn lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
By default, the option is enabled.
Allows you to configure the speed of the UEFI boot process.
By default, the Minimal option is enabled.
Set the BIOS POST load time.
System setup
69
Advertisement
Table of Contents
