Table of Contents
Advertisement
Installing the power adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power adapter port and provides a visual representation of the installation
procedure.
Steps
1. Align and place the power adapter port on the chassis.
2. Route the power adapter port cable through the screw post.
CAUTION:
Carefully route the power adapter port cable through the screw post for installing the power
adapter port on the chassis.
Next steps
1. Install the
system
board.
NOTE:
The system board can be installed with the heat sink attached.
2. Install the
power button with fingerprint
3. Install the
heatsink
assembly.
4. Install the
input output
5. Install the
display
assembly.
6. Install the
system
fan.
7. Install the
M.2 solid-state
8. Install the speakers.
9. Install the
base
cover.
10. Exit the
service
mode.
11. Install the microSD-card.
12. Follow the procedure in
reader.
board.
drive.
after working inside your
computer.
Removing and installing components
57
Advertisement
Table of Contents
