Table of Contents
Advertisement
Steps
1. Align and place the system chassis under the hinges of the display assembly.
2. Install the (M2x2.5) screw and four (M2x3) screws that secure the display hinges to the system.
3. Connect the display cable to its connector on the system board. Adhere the adhesive tape to secure the display cable.
4. Align and place the display cable bracket in place.
5. Install the (M2x2.5) screw to secure the display cable bracket.
Next steps
1. Install the
base
cover.
2. Exit the
service
mode.
3. Install the microSD-card.
4. Follow the procedure in
Input Output board
Removing the Input Output board
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Enter the
service
mode.
4. Remove the
base
cover.
About this task
The following image indicates the location of the Input Output board and provides a visual representation of the removal
procedure.
42
Removing and installing components
after working inside your
before working inside your
computer.
computer.
Advertisement
Table of Contents
