Installing the Coin-cell battery
1. Insert the coin-cell battery and press to lock.
2. Install:
a)
palmrest assembly
b)
keyboard
c)
memory module
d)
hard drive
e)
WLAN card
f)
access panel
g)
optical disk-drive
h)
battery
3. Follow the procedures in
Removing the Input/Output (I/0) Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) optical– disk drive
c) access panel
d) hard drive
e) memory module
f) keyboard
g) palmrest assembly
3. Disconnect the I/O board cable and lift the I/O board from the computer.
Installing the Input/Output (I/O) Board
1. Insert the I/O board into the chassis.
2. Connect the I/O board cable to the system board.
3. Install:
a)
palmrest assembly
b)
keyboard
c)
memory module
d)
hard drive
After Working Inside Your
computer.
Removing and Installing Components
17