Installing The Palmrest; Input/Output(I/O) Board; Removing The I/O Board - Dell Latitude 14 Rugged Extreme Owner's Manual

Installing the palmrest

1. Insert the palmrest into the slot on the computer until it clicks into place.
2. Turn the computer over and install the screws that secure the palmrest to the computer.
3. Install the:
a. SmartCard reader
b. system board
c. SIM board
d. fingerprint reader
e. WWAN card
f. WLAN card
g. GPS module
h. coin cell battery
i. ExpressCard
j. heat sink
k. GPU module
l. memory module
m. optical drive
n. docking board
o. base cover
p. keyboard
q. hard drive or SSD
r. battery
4. Follow the procedure in

Input/Output(I/O) board

Removing the I/O board

1. Follow the procedure in
2. Remove the:
a. battery
b. hard drive or SSD
50
After working inside your
Before working inside your
computer.
computer.