g.
Battery
9. Follow the procedure in
Input-Output boards
Removing the Input and Output board
1. Follow the procedure in
2. Remove the:
a.
Battery
b.
Optical drive
c.
Keyboard
d.
Base cover
3. To remove the Input/Output board (I/O board):
a. Disconnect the I/O board cable [1].
b. Remove the (M2x3) screw and lift I/O board from the computer [2, 3].
Installing the Input and Output board
1. Place the I/O board on the computer.
2. Connect the input/output (I/O board) cable and tighten the (M2x3) screw.
3. Install the:
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
33