Charging Mode 1 (Only Basic S 22) - Mennekes Basic 3,7 Operating And Installation Manual

7.2

Charging mode 1 (only Basic S 22)

T
WARNING
Risk of injury by unsuitable aids
Use of adapter plugs, extensions, or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adapter plugs, extensions, or additional
charging cables to charge the vehicle.
Fig. 14: Charging mode 1
Starting the charging process
f Connect the charging cable to the vehicle.
f Insert the plug fully into the charging socket SCHUKO®
of the charging station.
f Insert the key.
f Activate the key-operated push-button.
The system can be activated also with an external signal
transmitter (e.g. pay and display ticket machine).
9
The plug is not mechanically locked.
T
ATTENTION
Risk of property damage as a result of incorrect handling
Removing the key in position "I" may damage the lock.
f Before removing the key, turn the key to position "0".
f Remove the key.
Terminating the charging process
T
ATTENTION
Damage to the charging cable
Pulling the cable may cause cable breaks and other dama-
ges.
f Remove the charging cable only by pulling the plug
from the charging socket.
f To stop the charging process, remove the charging
cable by slowly unplugging the plug from the charging
socket.
Slowly removing the plug de-energises the
charging socket before disconnecting the plug
contacts.
Power failure during charging process
A power failure aborts the charging process. The plug can
be removed.
EN
17