Basic Safety Information; Qualification; Proper Condition; Observing Supervisory Duties - Mennekes eMobility- Gateway Operating And Installation Manual

2.4 Basic safety information

2.4.1 Qualification

Some activities in this manual require expertise in elec-
trical engineering. Performing activities in the absence
of knowledge and qualifications can lead to serious acci-
dents and death.
f Only carry out tasks for which you are qualified and
have been instructed.
f Please also observe the instructions for qualified
electricians in this manual.

2.4.2 Proper condition

Damaged device
If the device is damaged or defective, has a defective
housing or missing components, people can be seri-
ously injured by electric shock.
f Avoid collisions and improper handling.
f Do not use the device in case of damage / defects.
f Mark a damaged device, so that other persons can-
not use it.
f Have a qualified electrician rectify the damage with-
out delay.
Improper maintenance
Improper maintenance can affect the safety of the
equipment and cause accidents. This can seriously
injure or kill people.
f Observe the maintenance schedule.
f Have maintenance work carried out regularly by
qualified electricians (twice a year or annually).

2.4.3 Observing supervisory duties

Persons, especially children, and animals who are not
fully able to assess potential hazards pose a danger to
themselves and others.
f Keep away from the device and packaging.
4

2.4.4 Observing ambient conditions

If the permissible ambient conditions are not adhered to,
the functionality and operational safety of the device is
affected. This can cause accidents and severe injuries to
people.
Observe the following environmental conditions:
f Keep the ambient temperature from -25 to +40 °C.
f Avoid penetration of water.
f Avoid strong temperature fluctuations.
f Ensure adequate ventilation of the unit and avoid
heat accumulation.
f Keep device away from heat sources.
f Keep the device away from explosive or highly flam-
mable substances.