Loading The Receipt Paper - HYOSUNG NH-1800CE Operator's Manual

NH-1800CE

4.5 Loading the Receipt Paper

NOTE:
1.
Make sure the roll is in its proper roll form. (A deformed roll may cause jamming problems)
2.
When replacing the new roll, make sure the end of the roll paper has a clean cut. (See the below
figure.)
1) Open the Front Panel with key and pull this
outward completely with hands. (Please see the
Chapter 4.1.2)
2) Prepare the new paper roll. Please see the
NOTE described below
3) Remove the green paper holder by carefully
pulling it off and add the receipt paper into the
spindle. And then insert the green paper holder
tightly again to fix it.
4 - 15
4. Operating Instructions