HYOSUNG NH-1800CE Operator's Manual page 177

NH-1800CE
5.9.8 AUTO DAY TOTAL
AUTO DAY TOTAL feature allows the ATM to complete a Day Total operation (Without
Actually closing out the machine) at a predetermined time each day. This is useful if you are
doing accounting of your ATM on a day-to-day basis. Your processor cuts off its transactions
each day at a set time. By enabling Auto Day Total at the same time, your day's balance
should match the host. This information will appear as a journal record so, you will need to
access your journal to print or view the totals.
1) EN/DISABLE
- Display whether AUTO DAY TOTAL function is enabled or not.
- Set the value using EN/DISABLE button.
2) TOTAL TYPE
- Display AUTO DAY TOTAL TYPE
DAY TOTAL: ATM sends total to your processor then initialize total
TRIAL DAY TOTAL: ATM sends total to your processor
- Set the value using TOTAL TYPE button.
3) HOUR / MINUTE
- Display the time for the ATM to total itself
- Set the value using HOUR and MINUTE button.
5- 139
5. Operator Function