HYOSUNG NH-1800CE Operator's Manual page 36

NH-1800CE
4) The shiny side of the paper should be faced up
to be printed properly and the metallic tension
guide should be surrounded with paper to reduce
the tension during feeding
5) Insert the leading edge of paper into the
loading guide of the receipt printer slowly. When
the machine is initialized, the paper is going to
start feeding
6) If the paper does not feed at all during
initializing, make sure that paper has a CLEAN
CUT at the end and the green lever behind the
transport path is on its right place (It must not be
lifted up).
7) When finished loading paper, close the Front
Panel and remove the key.
4 - 16
4. Operating Instructions