HYOSUNG NH-1800CE Operator's Manual page 75

NH-1800CE
Changing the TEST COUNT
The TEST COUNT means the number of test.
If you want to change the test count, press BLANK key then input the test count and press ENTER
key. To delete the test count while inputting, press CLEAR key. To cancel the test while testing, press
CANCEL key.
NOTE: TEST COUNT affects when testing RECEIPT PRINTER, CASH DISPENSER, and MODEM.
Case 1) If you input test count '0', the test count will be "UNLIMIT"
Case 2) If you input test count 10, the test will perform 10 times.
Case 3) If you cancel a test and then perform same test, the test count will be continue.
e.g. If you cancel a test when the tested count is 3, and then perform same test, the tested count
starts at 3.
Case 4) If you cancel a test and then perform another test, the test count will be initialized.
e.g. If you cancel a test when the tested count is 3, and then perform another test, the tested count
starts at 0.
5- 37
5. Operator Function
BLANK Key