HYOSUNG NH-1800CE Operator's Manual page 174

NH-1800CE
[TCP/IP]
1) RMS STATUS SEND
- Display whether RMS STATUS SEND function is enabled or not.
- Set the value using EN/DISABLE button.
2) RMS INTERVAL
- Display "RMS STATUS SEND" cycle (unit: hours)
- Set the value using INTERVAL button. (Input the number from 1 to 24.)
3) URL EN/DISABLE
- Display whether to use URL or IP ADDRESS. If the value is ENABLE, that means the ATM uses
URL ADDRESS.
- Set the value using URL EN/DISABLE button.
4) RMS ADDRESS
- Display "RMS ADDRESS".
- Set the value using RMS ADDRESS button. If you press this button, It goes to next screen.
5) RMS LISTENNING PORT
- Display "RMS LISTENING PORT".
- Set the value using RMS LISTENING PORT button. (Input the number from 0 to 65535)
- Default port is 9999
5- 136
5. Operator Function