HYOSUNG NH-1800CE Operator's Manual page 199

NH-1800CE
Error Code
4004300 Error if total reject is more than 20 sheets
4004400 Error if continuous 5 times are rejected
In case the number of notes detected
4004500 outlet sensor(CS13) is more than required
notes
4004600 Program error(Separated rejection)
4004700 1 cassette mis-feed error (Separated rejection)
Error if the number of dispensed notes is not
4004800
matched to the requested
Error to dispense 0 sheets to be required
4004900
(Separated rejection
4004A00 Error of note jam (Separated rejection)
Continuous 3 times error if note is long
4004B00
(once tried, twice retried)=>Separated rejection
In case the number of notes detected outlet
4004C00 sensor(CS13) is more than that of notes
detected on CS1A,B sensor
Error of being removed 1st cassette before
4004D00
separate rejection
Error of being removed 2nd cassette before
4004E00
separate rejection
Description
6- 19
Trouble shooting
1. Check notes in Reject Box
2. Rearrange notes in Cassette
3. Remove dust in CS1AB, CS15AB, CS31AB,
CS41AB Sensor
4. Check dust in existence CS5 Sensor Guide
5. Check notes index value
1. Check notes in Reject Box
2. Rearrange notes in Cassette
3. Check dust in Main Motor Encoder Slit
4. Remove dust in CS15AB, CS31AB, CS1AB
Sensor
5. Exchange CS8 Encoder Slit Sensor
1. Check notes dispensed and rejected
2. Remove dust in CS13 Sensor
3. Exchange sensor after abnormal operating
CS13 Sensor
1. Initialize after Reset Power
2. Upgrade Cash Dispenser Firmware or re-
download
3. Exchange Cash Dispenser B/D
1. Check notes in 1 Cassette
2. Check Sensor(CS6) Poll
3. Check jam in 1 cassette and reload
4. Remove dust in CS1A, CS1B Sensor
5. Exchange 1 cassette box when there are many
error
1. Check CS13 sensor (note jam and dust)
2. Replace CS13 sensor
1. Check received command
2. Check communication cable
3. Check Cash Dispenser Firmware Version
1. Remove jammed notes on Cash Dispenser
return path
2. Remove dust in CS1~CS4 sensor
3. Install after rearranging notes in cassette
1. Check state of notes in reject box
2. Rearrange notes in cassette
3. Check Index of notes
4. Check foreign objects in the main motor encoder
slit
5. Replace the CS8 encoder slit sensor
1. Check CS1 sensor
2. Reconnect CS1 sensor
1. Set cassette #1 correctly
2. Check the catcher inside cassette #1 guide
1. Set cassette #2 correctly
2. Check the catcher inside cassette #2 guide
6. Appendix