HYOSUNG NH-1800CE Operator's Manual page 83

NH-1800CE 5. Operator Function
5.6.6.2 FLICKER
This FLICKER contains ALL FLICKER SENSOR, EPP FLICKER, CDU FLICKER, SPR FLICKER
and MCU FLIKCER. Please press each button on this menu to change test mode ON, OFF or
FLICKING. To go back to the previous screen, press the CANCEL key in pinpad.
Accessing the SENSOR
1) Select 'DIAGNOSTICS' in the OPERATOR FUNCTION.
2) Select 'AUXILIARY UNIT' in the DIAGNOSTICS menu and then select 'FLICKER' in the AUXILIARY
menu.
3) Select any button to test EPP, CDU, SPR, MCU in each or ALL FLICKER..
5.6.8 AGING
The AGING function is only used at the factory.
Accessing the AGING
1) Select 'DIAGNOSTICS' in the OPERATOR FUNCTION.
2) Select 'AGING' in the 'DIAGNOSTICS' menu.
3) All units will be tested unlimitedly. When you press "CANCEL" key, the testing will be stopped.
5- 45