HYOSUNG NH-1800CE Operator's Manual page 143

NH-1800CE
5.8.8 SYSTEM CONTROL
This SYSTEM CONTROL menu contains SOFTWARE UPDATE, REBOOT, BACKUP ALL
JOURNAL TO USB, BACKUP JOURNAL BY DATE TO USB, BACKUP LOG TO USB, BACKUP
NVRAM, RESTORE NVRAM and CLEAR NVRAM.
Please press each button on this menu to go to next screen or to operate the related function..
And if you want to go back to the previous screen, press the CANCEL key.
You can back up a various kinds of journal data and log data you want in this menu. Please make sure
that USB drive is connected into USB slot before pressing the button. When BACKUP ALL
JOURNALS TO USB, BACKUP JOURNAL BY DATE TO USB or BACKUP LOG TO USB button is
selected, this data will be sent into USB flash drive. When SOFTWARE UPDATE is entered, it will
change to the screen of SOFTWARE UPDATE. This is because Software Update functionality is
supported at SYSTEM CONTROL menu. When SYSTEM CONTROL is submitted the files in USB
flash drive will be copied to the ATM.
Terminal configuration data is saved at NVRAM, so BACKUP NVRAM and RESTORE NVRAM button
is to use the backup and restore terminal configurations
5- 105
5. Operator Function