Marketing Mode (Ar); Buzzer Enable (B0) - Elstat ems55advanced Manual

display
Defines the minimum number of door openings or motion counts to indicate an active 30 minute period
description in the self-learning matrix, as described below. The activity frequency applies across all 30 minute peri-
ods within the self-learning matrix, not to individual 30 minute periods.
considerations See below.
range See below
global default 00 (low frequency)
The table below describes the values for activity frequency (AF).
value name
00 low frequency
01 medium frequency
02 high frequency
03 automatic
Note:
AF
If is set to 3, the ems controller must run continuously for 48 hours to set the value of the activity frequency.
l
If power is lost during the 48 hour period, the ems controller restarts the 48 hour period.
The ems controller must complete the 48 hour period to determine the activity frequency before starting the 1-day or 7-day learning
period.
10.5

marketing mode (Ar)

The table below details the marketing mode (Ar) parameter.
display
Sets the cooler lights to remain on at all times for display purposes.
description
The coolers lights will remain on during saving mode.
Does not affect saving temperature.
considerations Made available to ems55advanced GDC firmware from June 2012.
Not used with OFC firmware.
range 00 (off) or 01 (on)
global default 00 (off)
10.6

buzzer enable (b0)

The table below detail the buzzer enable (b0) parameter.
description
1 door opening or 1 motion count
1 door opening or 3 motion counts
2 door openings or 6 motion counts
The ems controller runs continuously for 48 hours in the
ready mode. After 48 hours, the ems controller sets the
value of the activity frequency to 0, 1, or 2.
ems55advanced and ems55Radvanced / General Use
68 of 84