How To View The Ems55Advanced Parameter Settings (Ps) Gdc Firmware - Elstat ems55advanced Manual

step
2 Release the set button when PAS appears
3 Press the set button four times (x4)
4 Press the up button once (x1)
5 Press the down button twice (x2)
6 Press the defrost / teach button twice (x2)
7.4 how to view the ems55advanced parameter settings (PS) GDC firmware
View the parameter settings to check the values of the parameters.
View the parameter settings as follows:
Press and hold the set button until PAS is displayed.
1.
2. Enter the button sequence of the password.
Ensure that PS is displayed.
3.
set
4. Press and hold the
Keep the men u button pressed to scroll through the parameter settings.
5.
button to view the parameter name and value alternatively.
See "Celsius or Fahrenheit (CF)" on
page 70
image
See "display stability (d2)" on
page 70
ems55advanced and ems55Radvanced / General Use
37 of 84